The illustrated glossary
Inside your appliance. Parts, in plain English.
Know what a part does before you call, so you and the technician start on the same page.

The small parts. The bigger picture.
Appliance words, made simple
Know what’s inside.
- Drain pump
- Moves used water out of the dishwasher.
- Coarse filter
- Catches larger pieces of food before they reach the drain system.
- Water supply valve
- Controls water entering the appliance from your home’s plumbing.
Water in.

Water supply valve
Controls water entering the appliance from your home’s plumbing.

Flow meter
A flow meter measures how much water passes through the dishwasher’s water inlet as it fills. It’s an internal part you can’t see or service. If your dishwasher fills slowly or not at all, start with the water supply.

Water hardness / softener
Water hardness is the amount of dissolved minerals in your tap water. An ASKO dishwasher with a built-in softener treats it with dishwasher salt, so set the right hardness level and keep salt in to avoid a white film on dishes.
Water out.
Drain pump
Moves used water out of the dishwasher.
Brushless drain pump
A brushless drain pump is a drain pump driven by a brushless (BLDC) motor. On the ASKO DBI786 it has its own code, F68, and the manual treats it like F11: filters, pump wheel and drain hose come first.
Drain hose
The drain hose carries dirty water from the dishwasher to your sink drain or another household drain. A kink, a sharp bend or a blockage in it can leave water in the tub, so check it once the filters are clean.
Coarse filter
Catches larger pieces of food before they reach the drain system.
Fine filter
The fine filter sits under the coarse filter and catches the smaller particles. Your ASKO rinses most of that debris away during each wash, but the filter still needs a hand clean from time to time.
Heat.

Heating element
A heating element turns electricity into heat. It warms the wash water in a dishwasher or washer and heats the cavity of an oven. A heating error tells you the heat isn’t right; it doesn’t prove the element itself has failed.

NTC sensor
An NTC temperature sensor is a small probe whose electrical resistance drops as it warms up. The appliance’s electronics read that resistance to know how hot the water or air is, and use it to control heating.
Door and protection.

Door lock
The door lock holds the door shut while a cycle runs. If it doesn’t click into place, the ASKO DBI786 dishwasher won’t start, and the WM86L washer shows E2, a door lock error.

Overflow protection
Overflow protection is a safety system that watches the water level in your dishwasher. If the water rises above normal, it starts pumping out and shuts off the supply, and an ASKO shows F54 or “Overfilling water.”
Which part, which problem, which code.
Each part links to the problems it can cause and the codes that point to it.
Dishwasher
Drain pumpdishwasherShows up as
Coarse filterdishwasher
Fine filterdishwasher
Brushless drain pumpdishwasherShows up as
Water supply valvedishwasherShows up as
Overflow protectiondishwasherShows up as
Heating elementdishwasherShows up as
Drain hosedishwasherShows up as
Dishwasher circulation pumpdishwasher
Washer
Dryer
Door lockdryerShows up as
What’s in the glossary?
Fourteen parts, explained in plain English: twelve dishwasher parts and two washer parts, the drain pump and the pump filter. Each entry says what the part does and which codes and problems mention it.
Why are the dishwasher parts grouped like that?
They follow the water: water in, water out, heat, and door and protection. When a dishwasher won’t drain, for example, everything you might check sits together under water out. The A–Z list has every term, the washer parts included.
Can I order a part from the photo?
No. The photos show what that type of part looks like, not the exact one for your model. The right part depends on your model number and on what the technician finds.
Which parts matter when water stays in my dishwasher?
Start with the coarse filter and the fine filter, then the drain pump and the drain hose. Their pages link to F11 and F68, the two drain codes. Clean the filters before you suspect the pump.
Code / symptom / part / service
Connect the message to the next step.
Dishwasher not draining
The DBI786 manual traces water left above the filters to four things you can check yourself: clogged or loose filters, debris in the drain pump, a missing drain pump stop, and a kinked or blocked drain hose. Unplug the dishwasher before you start.
Dishwasher repair
Arrange a model-specific diagnostic at the appliance.
Find your metro
Office details and the access information to include.



