Inside the appliance
Overflow protection. In plain English.
Overflow protection is a safety system that watches the water level in your dishwasher. If the water rises above normal, it starts pumping out and shuts off the supply, and an ASKO shows F54 or “Overfilling water.”

Where it fits.
Overflow protection in the appliance
It is built into the dishwasher and works on its own, so there is nothing for you to see, adjust or reset. Treat it as a safety system, never as a part to bypass.
The picture illustrates the component type. It does not identify a compatible replacement for your model.
What changes when this system needs attention.
Overflow protection concerns can appear alongside a change in performance or a recurring code. Testing is needed before deciding whether the component is responsible.
Owner care, within the model instructions.
Switch off and unplug before owner-accessible checks. Watch for standing water and sharp debris. Do not touch a wet plug or electrical area, remove service panels, or go beyond your model’s owner instructions.
- 1
Turn off the water supply valve
When F54 or an overfilling message appears, close the water supply valve first. Only then pull the plug, so water can’t leak out of the dishwasher.
- 2
Listen for the pump
On the DBI675, a drain pump that keeps whirring even with the main power switch off means the overflow protection has tripped. Turn the water off, unplug and call for service.
- 3
Don’t keep restarting it
Don’t clear the message and start cycle after cycle. Leave the water off until a technician has looked.
Cleaning or replacement?
Leave internal testing to a technician.
Book a visit as soon as F54 appears, and right away if there is water on the floor. Keep the supply valve closed until the technician arrives.
Arrange a diagnosticSources and model boundaries.
These references support the Overflow protection guidance. Read the manual that matches your model.
- Asko DBI786IXXLSSOF.U User Manual, Troubleshooting (PDF on the Gorenje Group document server, linked from us.asko.com)
- Asko DBI675IXXLS.U / DBI675THXXLS.U / DBI675PHXXLS.U Operating Instructions, Troubleshooting (PDF on the Gorenje Group document server, linked from us.asko.com)
Use the instructions for your exact model. See how we research these pages.
What sets off the overflow protection?
It reacts when the water in the dishwasher rises above the normal level. The manuals don’t name one single cause, which is why ASKO sends F54 to service rather than to an owner fix.
What’s the difference between F10 and F54?
Both are overfilling messages on the DBI786. For F10, the manual’s first step is to unblock the drain pump. For F54, it is to turn off the water supply valve and contact service.
Why does my dishwasher hum and refuse to start?
On the DBI675, a whirring sound and a dishwasher that still won’t start after you clear the drain pump means the overflow protection has tripped. Shut off the water, unplug and call for service.
Can I keep using the dishwasher after F54?
No. Leave the water supply valve closed and don’t run another cycle until it has been checked. If water has reached the floor, dry it up and keep the power off.
Code / symptom / part / service
Connect the message to the next step.
F10
F10 means the water in your dishwasher rose past the first overfill level. ASKO’s first step is to clear the drain pump. If F10 keeps coming back after that, book a technician.
Dishwasher not draining
The DBI786 manual traces water left above the filters to four things you can check yourself: clogged or loose filters, debris in the drain pump, a missing drain pump stop, and a kinked or blocked drain hose. Unplug the dishwasher before you start.
Dishwasher repair
Arrange a model-specific diagnostic at the appliance.
Find your metro
Office details and the access information to include.



