Start from the symptom

ASKO dishwasher not cleaning well.

Start with the spray arms and filters. If a dish blocks a spray arm or the coarse and fine filters are clogged, water can’t reach every surface. Then look at your loading, the detergent dose and the program you chose before you book.

Last reviewed

Pulled-out dishwasher rack with plates showing baked-on food specks and cloudy glasses, a spray arm visible above
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Start with safe observations.

Switch off and unplug before owner-accessible checks. Watch for standing water and sharp debris. Do not touch a wet plug or electrical area, remove service panels, or go beyond your model’s owner instructions.

  1. 1

    Turn the spray arms by hand

    With the dishwasher off, turn each spray arm. If it catches on a dish or a pan handle, move the item. Clean the arms if their holes look blocked.

  2. 2

    Clean and refit the filters

    Take out both filters, wash off the debris and check that they lock fully when refitted. ASKO lists loose filters as a cause, not just dirty ones.

  3. 3

    Check the dose and the program

    Dose detergent for your water hardness. For heavily soiled loads, pick a program with Heat boost (Intensive mode on the DBI675).

When observation becomes a service request.

Leave internal testing to a technician.

Book a visit if dishes still come out dirty after you’ve cleaned the filters and spray arms and adjusted loading and detergent, or if F52 comes back after the filters are clean.

Arrange a diagnostic

Sources and model boundaries.

These references support the Dishwasher not cleaning well guidance. Read the manual that matches your model.

  • Asko DBI675IXXLS.U / DBI675THXXLS.U / DBI675PHXXLS.U Operating Instructions, Troubleshooting (PDF on the Gorenje Group document server, linked from us.asko.com)
  • Asko DBI786IXXLSSOF.U User Manual, Troubleshooting (PDF on the Gorenje Group document server, linked from us.asko.com)

Use the instructions for your exact model. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
What does F52 mean on my dishwasher?

F52 is the dishwasher’s prompt to clean its two filters; newer manuals describe it as a water level issue. Clean them, run any program, and book a visit if the code returns.

Can too much detergent leave dishes dirty?

Yes. ASKO notes that far too much or far too little detergent can both give poor results. Dose by your water hardness rather than filling the cup to the brim.

Why do my glasses come out dirty inside?

Glasses that tip over during the wash fill with water and miss the spray. Load them so they can’t topple, and keep very tall glasses out of the basket corners.

What is the drain pump stop, and why does it matter?

It’s the small colored stop on the right of the bottom drain (yellow on the DBI786). If it was left out after cleaning the pump, washing results suffer, so check it’s in place.

Let’s take care of it.

Your home has a rhythm.
Let’s bring it back.