Inside the appliance
Cooktop control panel. In plain English.
The control panel is the touch area where you set the zones. In the ASKO induction hob manual, Fc01, FC04, FC08, FC10 and FH are control panel errors; the fix is a 10-second disconnect, then a technician if the code stays. The manual also covers the child lock on this panel.

Where it fits.
Cooktop control panel in the appliance
On the glass at the front of the induction hob.
The picture illustrates the component type. It does not identify a compatible replacement for your model.
What changes when this system needs attention.
Cooktop control panel concerns can appear alongside a change in performance or a recurring code. Testing is needed before deciding whether the component is responsible.

Cooktop zone won’t heat
Start with the pan. On ASKO HI5 induction cooktops, a zone only heats a pan whose base a magnet grips firmly. If the zone display keeps flashing after you switch it on, the pan isn’t suitable or is too small. If the pan is right and the zone stays cold, book a visit.

Cooktop showing an error
Note the exact code, upper and lower case included. On ASKO HI5 induction cooktops, F0 to F7 point to the generator and Fc01, FC04, FC08, FC10 or FH to the controls: cut the power for 10 seconds, then reconnect. Fc alone means overheating, so let it cool. Book if a code stays.
Owner care, within the model instructions.
Switch off and unplug before owner-accessible checks. Watch for standing water and sharp debris. Do not touch a wet plug or electrical area, remove service panels, or go beyond your model’s owner instructions.
- 1
Read the code
Note whether it is Fc01, FC04, FC08, FC10 or FH.
- 2
Disconnect for 10 seconds
Disconnect the hob from the mains, wait 10 seconds and reconnect.
- 3
Check the child lock
To lock or unlock the hob, touch the on/off key for about 2 seconds.
Cleaning or replacement?
Leave internal testing to a technician.
The control panel error returns after the reset.
Touch keys do not respond with the child lock off.
The glass is cracked.
Arrange a diagnosticSources and model boundaries.
These references support the Cooktop control panel guidance. Read the manual that matches your model.
- Induction hob HI5320F, HI5632F, HI5642F, HI5643F, HI5842F, HI5952F, HI5954F operating instructions
Use the instructions for your exact model. See how we research these pages.
What does Fc01 mean?
The manual lists Fc01, FC04, FC08, FC10 and FH as a control panel error.
What do I do?
Disconnect the hob from the mains for 10 seconds, reconnect, and call a technician if the code stays.
How do I use the child lock?
Touch the on/off key for about 2 seconds to lock or unlock.
What if the glass is cracked?
Switch off at once and disconnect from power; the manual says to contact your installer.
Code / symptom / part / service
Connect the message to the next step.
Cooktop zone won’t heat
Start with the pan. On ASKO HI5 induction cooktops, a zone only heats a pan whose base a magnet grips firmly. If the zone display keeps flashing after you switch it on, the pan isn’t suitable or is too small. If the pan is right and the zone stays cold, book a visit.
Cooktop repair
Arrange a model-specific diagnostic at the appliance.
Find your metro
Office details and the access information to include.

