What it means
Turn off your dishwasher’s water supply now. F40 means the inlet valve is letting water in when it should be shut. Keep the water off and call a technician.
ASKO dishwasher F40 / Water supply
Turn off your dishwasher’s water supply now. F40 means the inlet valve is letting water in when it should be shut. Keep the water off and call a technician.
Also shown as Fault F40
Turn off your dishwasher’s water supply now. F40 means the inlet valve is letting water in when it should be shut. Keep the water off and call a technician.
Turn the dishwasher’s water supply valve off and leave it off.
Always. Once the water supply is shut off, F40 needs a technician.
Your check-list / saved on this device

Turn the dishwasher’s water supply valve off and leave it off. Wipe up any water on the floor.

The manual gives you no other fix for F40. Book a visit and don’t run the dishwasher until it’s been checked.
Schematic. Layouts vary by model. Select an outlined part to see its photo and the matching check.

Component reference
The water supply valve is the shutoff on the household pipe that feeds your dishwasher or washer.
Read the definitionManufacturer document
ASKO / Gorenje Group
Document 843099en / p. 29
F40 means the same thing on the DBI675, DBI776 and DBI786.
No. Stop, close the water supply and leave it closed. The valve that should hold the water back isn’t sealing.
Not necessarily. A message that disappears doesn’t mean the valve has started sealing again. Keep the supply off until a technician has looked at it.
Water can keep coming in past the leaking valve. Closing the supply is the one sure way to stop it until the valve is repaired.
No. F40 is about the inlet valve letting water through. F54 means the water level got too high and the overflow guard stepped in. Both start with closing the supply valve.
Code / symptom / part / service
F12 means your dishwasher isn’t getting enough water. Make sure its water supply valve is fully open, then press any button and restart the program. If F12 returns with the valve open, book a technician.
The DBI786 manual traces water left above the filters to four things you can check yourself: clogged or loose filters, debris in the drain pump, a missing drain pump stop, and a kinked or blocked drain hose. Unplug the dishwasher before you start.
Controls water entering the appliance from your home’s plumbing.
Arrange a model-specific diagnostic at the appliance.
Office details and the access information to include.