Inside the appliance
Dishwasher circulation pump. In plain English.
F56 is the code an ASKO dishwasher gives for its circulation pump, which moves wash water around the tub. The DBI786 table says to run any dishwashing program again first. The DBI675 table sends you straight to service. Book a visit if F56 returns.

Where it fits.
Dishwasher circulation pump in the appliance
Under the tub. The manuals show no position for the circulation pump, so none is stated.
The picture illustrates the component type. It does not identify a compatible replacement for your model.
What changes when this system needs attention.
Dishwasher circulation pump concerns can appear alongside a change in performance or a recurring code. Testing is needed before deciding whether the component is responsible.

Dishwasher not draining
The DBI786 manual traces water left above the filters to four things you can check yourself: clogged or loose filters, debris in the drain pump, a missing drain pump stop, and a kinked or blocked drain hose. Unplug the dishwasher before you start.

Dishwasher leaking water
Close the water supply valve before anything else, then look at the display. F54 tells you the overflow guard has tripped; F40 tells you the inlet valve is letting water through when it should be shut. Either way, keep the water off and book service.
Owner care, within the model instructions.
Switch off and unplug before owner-accessible checks. Watch for standing water and sharp debris. Do not touch a wet plug or electrical area, remove service panels, or go beyond your model’s owner instructions.
- 1
Run one program again
The DBI786 table for F56 says to run any dishwashing program once more.
- 2
Skip the retry on a DBI675
The DBI675 table gives the Circ. pump entry a direct instruction to call. There is no owner step.
- 3
Check the filters are in
Both manuals say the dishwasher must not be used without the coarse and fine filters in place.
- 4
Separate it from a whirring drain pump
A whirring that continues after the main power switch is off is the drain pump, not this pump. The DBI675 says to turn off the water, unplug and call.
- 5
Note which model you have
The two tables read differently, so mention the model on the door frame when you book.
Cleaning or replacement?
Leave internal testing to a technician.
Book a technician when F56 returns after the extra program.
For F56 on a DBI675, book a technician straight away.
Arrange a diagnosticSources and model boundaries.
These references support the Dishwasher circulation pump guidance. Read the manual that matches your model.
- Asko DBI786IXXLSSOF.U User Manual
- Asko DBI675IXXLS.U / DBI675THXXLS.U / DBI675PHXXLS.U Operating Instructions
Use the instructions for your exact model. See how we research these pages.
What does F56 mean on an ASKO dishwasher?
Both tables tie F56 to the circulation pump. On the DBI786, run any program once more. If F56 persists, book a visit.
Is a second cycle worthwhile after F56?
On a DBI786, yes, once. The DBI675 table gives no retry, so go straight to booking.
Is the circulation pump the same as the drain pump?
No. The manuals treat them separately: the drain pump empties the tub and has its own filters and stop, while F56 names the circulation pump.
Can I replace the pump myself?
No owner repair is printed. Arrange a visit, quoting model and code.
Code / symptom / part / service
Connect the message to the next step.
F56
F56 points to the circulation pump, which pushes wash water through the spray arms. On the DBI786 and DBI776, run one more program first. On the DBI675, the manual says to call for service straight away.
Dishwasher not draining
The DBI786 manual traces water left above the filters to four things you can check yourself: clogged or loose filters, debris in the drain pump, a missing drain pump stop, and a kinked or blocked drain hose. Unplug the dishwasher before you start.
Dishwasher repair
Arrange a model-specific diagnostic at the appliance.
Find your metro
Office details and the access information to include.

