Inside the appliance
Brushless drain pump. In plain English.
A brushless drain pump is a drain pump driven by a brushless (BLDC) motor. On the ASKO DBI786 it has its own code, F68, and the manual treats it like F11: filters, pump wheel and drain hose come first.

Where it fits.
Brushless drain pump in the appliance
It does the same job as any drain pump, below the filters at the bottom of the tub. You can reach its pump wheel behind the yellow drain pump stop. The motor and its connections sit under the tub and are not owner parts.
The picture illustrates the component type. It does not identify a compatible replacement for your model.
What changes when this system needs attention.
Brushless drain pump concerns can appear alongside a change in performance or a recurring code. Testing is needed before deciding whether the component is responsible.
Owner care, within the model instructions.
Switch off and unplug before owner-accessible checks. Watch for standing water and sharp debris. Do not touch a wet plug or electrical area, remove service panels, or go beyond your model’s owner instructions.
- 1
Clean both filters
Lift out the coarse filter, then turn the fine filter’s locking ring counterclockwise and lift it out. Clean both and refit them before the next run.
- 2
Free the pump wheel
With the dishwasher unplugged and the water scooped out, pull the yellow drain pump stop and turn the wheel behind it. Remove any glass or sharp bits carefully.
- 3
Check the drain hose
Look along the visible hose for kinks or sharp bends. The manual asks you to make sure it is fitted as the installation instructions show.
Cleaning or replacement?
Leave internal testing to a technician.
Book a technician if F68 returns once the filters, pump wheel and hose are clear. Testing a BLDC motor and its control takes instruments and access from below the tub.
Arrange a diagnosticSources and model boundaries.
These references support the Brushless drain pump guidance. Read the manual that matches your model.
- Asko DBI786IXXLSSOF.U User Manual, Troubleshooting (PDF on the Gorenje Group document server, linked from us.asko.com)
Use the instructions for your exact model. See how we research these pages.
What does F68 mean on my ASKO dishwasher?
On the DBI786, F68 refers to the brushless drain pump. The manual gives it the same first steps as F11: clean the filters, run a program, make sure the pump isn’t blocked and check the drain hose. If it keeps returning, contact service.
How is it different from a regular drain pump?
It does the same job: it empties the tub. The difference is the motor type. The DBI786 lists it under a separate code, F68, next to the general drain code F11.
Can I replace a brushless drain pump myself?
We don’t recommend it. The owner steps in the manual stop at the pump wheel behind the drain pump stop. The motor, its wiring and the control sit under the tub, behind panels.
Does my ASKO dishwasher have a brushless drain pump?
Look at the error table in your model’s manual. If it lists F68 as a BLDC drain pump message, as the DBI786 does, your dishwasher has one.
Code / symptom / part / service
Connect the message to the next step.
F11
F11 means your ASKO dishwasher couldn’t pump the water out. Clean the coarse and fine filters first, then clear the drain pump and check the drain hose. All three are owner jobs in the manual, done with the power off.
Dishwasher not draining
The DBI786 manual traces water left above the filters to four things you can check yourself: clogged or loose filters, debris in the drain pump, a missing drain pump stop, and a kinked or blocked drain hose. Unplug the dishwasher before you start.
Dishwasher repair
Arrange a model-specific diagnostic at the appliance.
Find your metro
Office details and the access information to include.



