What it means
F68 points to the brushless drain pump that empties your dishwasher. Start with the same checks as F11: clean the filters, clear the pump and look at the drain hose. Call if the code comes back.
ASKO dishwasher F68 / Drain
F68 points to the brushless drain pump that empties your dishwasher. Start with the same checks as F11: clean the filters, clear the pump and look at the drain hose. Call if the code comes back.
Also shown as Fault F68
F68 points to the brushless drain pump that empties your dishwasher. Start with the same checks as F11: clean the filters, clear the pump and look at the drain hose. Call if the code comes back.
Pull the plug before you touch the filters or the pump, and bail the water out instead of reaching into it.
F68 is still on the display, or water is still in the tub, after the filters, pump wheel and hose all check out.
Your check-list / saved on this device

Unplug the dishwasher, lift out the coarse and fine filters and rinse off food and grease. Seat them properly when you put them back.

Remove the yellow pump stop and spin the pump wheel behind it by hand. If it doesn’t turn freely, take out whatever is jamming it. Put the stop back before you plug in.

Look along the visible hose for kinks or tight bends. Hose connections behind the cabinet are a job for a technician.

If F68 returns once everything is clean and refitted, book a diagnostic. The pump motor and its wiring need testing you can’t do at home.
Schematic. Layouts vary by model. Select an outlined part to see its photo and the matching check.

Component reference
The drain pump pushes used water out of your ASKO dishwasher and into the drain hose at the end of a cycle.
Read the definition
Component reference
The coarse filter catches the larger food scraps that can’t pass through the drain pump.
Read the definition
Component reference
The fine filter sits under the coarse filter and catches the smaller particles.
Read the definition
Component reference
A brushless drain pump is a drain pump driven by a brushless (BLDC) motor.
Read the definition
Component reference
The drain hose carries dirty water from the dishwasher to your sink drain or another household drain.
Read the definitionManufacturer document
ASKO / Gorenje Group
Document 879712en / pp. 38–39, 45
F68 appears in the DBI786 manual and applies to the DBI776 as well. The DBI675 manual doesn’t list it.
No. The DBI675 manual has no F68. The code comes from the DBI786 manual, where the drain pump is a brushless (BLDC) type.
It’s the motor type the DBI786 uses to pump water out. Your checks stay the same as for any drain problem: filters, pump wheel, hose.
Do the checks, then run one program to test it. If F68 comes back, stop and book a visit instead of running more washes.
Only if testing shows the pump has failed. The manual’s own first steps are the filters, the pump wheel and the hose, because those can also stop the water draining.
Code / symptom / part / service
F10 means the water in your dishwasher rose past the first overfill level. ASKO’s first step is to clear the drain pump. If F10 keeps coming back after that, book a technician.
The DBI786 manual traces water left above the filters to four things you can check yourself: clogged or loose filters, debris in the drain pump, a missing drain pump stop, and a kinked or blocked drain hose. Unplug the dishwasher before you start.
Moves used water out of the dishwasher.
Arrange a model-specific diagnostic at the appliance.
Office details and the access information to include.