Start from the symptom

ASKO dishwasher not draining? Quick checks and repair.

The DBI786 manual traces water left above the filters to four things you can check yourself: clogged or loose filters, debris in the drain pump, a missing drain pump stop, and a kinked or blocked drain hose. Unplug the dishwasher before you start.

Last reviewed

Open dishwasher with a layer of murky standing water around the drain filter and a few food scraps floating in the bottom of the tub
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Start with safe observations.

Switch off and unplug before owner-accessible checks. Watch for standing water and sharp debris. Do not touch a wet plug or electrical area, remove service panels, or go beyond your model’s owner instructions.

  1. 1

    Unplug it first

    Switch the dishwasher off and pull the plug before you put your hands in the tub. Scoop or sponge out the standing water, and watch for broken glass.

  2. 2

    Clean both filters

    Lift out the coarse and fine filters, rinse them and refit them until they lock. Plug back in and run a program to see whether it drains.

  3. 3

    Clear the drain pump

    If water still sits in the tub, unplug again, take out the filters and the drain pump stop, and turn the pump wheel by hand to free anything caught. Put the stop back before the filters.

  4. 4

    Look at the drain hose

    Check the part of the hose you can see for kinks and sharp bends. If reaching it means pulling the dishwasher out of the cabinet, leave that to a technician.

When observation becomes a service request.

Leave internal testing to a technician.

Book a visit if water stays in the tub or F11 or F68 comes back after these checks. Leave drain pump testing, wiring and control checks to a technician.

Arrange a diagnostic

Sources and model boundaries.

These references support the Dishwasher not draining guidance. Read the manual that matches your model.

  • Asko DBI786IXXLSSOF.U User Manual, Troubleshooting (PDF on the Gorenje Group document server, linked from us.asko.com)

Use the instructions for your exact model. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
What does F11 mean on my dishwasher?

F11 means the dishwasher couldn’t drain the tub. The first checks are the ones on this page: filters, then the pump, then the hose. If the code returns after all three, book a visit.

Is F68 different from F11?

F68 appears on newer models with a brushless drain pump and points to that pump. ASKO gives it the same first checks as F11, so start there before assuming the pump has failed.

Can I pour drain cleaner into my dishwasher?

No. ASKO says never to use chemical drain cleaners, CLR or antifreeze in the dishwasher. Clear the filters and pump by hand instead.

My dishwasher is newly installed and won’t drain. What should I check?

Look at the drain connection under the sink. ASKO’s checklist asks whether the cone-shaped end of the drain boot was trimmed to match the largest size of the fitting it connects to. If you’re not comfortable loosening the hose there, a technician can check it.

Let’s take care of it.

Your home has a rhythm.
Let’s bring it back.