Before work starts
You agree the price with the technician before any work starts. Exact cost is confirmed after an on-site diagnostic.
Independent appliance repair
We repair ASKO dishwashers that won’t drain, fill or heat, that leak, or that stop with an F code on the display. Tell us what the machine does and when; the technician finds the cause on site and walks you through the fix before starting.


The DBI786 manual traces water left above the filters to four things you can check yourself: clogged or loose filters, debris in the drain pump, a missing drain pump stop, and a kinked or blocked drain hose. Unplug the dishwasher before you start.

Close the water supply valve before anything else, then look at the display. F54 tells you the overflow guard has tripped; F40 tells you the inlet valve is letting water through when it should be shut. Either way, keep the water off and book service.

On ASKO dishwashers like the DBI786 and DBI675, you press Start and then close the door within four seconds. If the door isn’t shut in time, nothing happens. Check that first, then look for Delayed start, the child lock and power at the outlet or breaker.

Start with the spray arms and filters. If a dish blocks a spray arm or the coarse and fine filters are clogged, water can’t reach every surface. Then look at your loading, the detergent dose and the program you chose before you book.

The DBI786 manual names two causes for detergent left in the cup: the compartment was damp when you filled it, or a dish stopped the lid from opening. Dry the compartment before filling it, and keep large items clear of the lid.

A lukewarm finish isn’t proof the heater has failed. Check which program you ran and read the display. If it shows F41, the manual asks you to run Self-cleaning with citric acid before anything else; if F41 comes back, the dishwasher needs service.
F11 means your ASKO dishwasher couldn’t pump the water out. Clean the coarse and fine filters first, then clear the drain pump and check the drain hose. All three are owner jobs in the manual, done with the power off.
F68 points to the brushless drain pump that empties your dishwasher. Start with the same checks as F11: clean the filters, clear the pump and look at the drain hose. Call if the code comes back.
F12 means your dishwasher isn’t getting enough water. Make sure its water supply valve is fully open, then press any button and restart the program. If F12 returns with the valve open, book a technician.
Turn off your dishwasher’s water supply now. F40 means the inlet valve is letting water in when it should be shut. Keep the water off and call a technician.
Turn off the water supply first, then unplug. F54 means the overflow guard found the water too high, started pumping it out and cut the supply. Keep the dishwasher off and call a technician.
F41 is a heater error on the DBI786 and DBI776. ASKO’s first step is the Self-cleaning program with citric acid. If F41 comes back, turn off the water, unplug the dishwasher and book a technician.
These are the dishwasher parts a technician may look at while tracing a problem. Nothing is replaced until the diagnostic shows it’s needed.

Moves used water out of the dishwasher.

Catches larger pieces of food before they reach the drain system.

The fine filter sits under the coarse filter and catches the smaller particles. Your ASKO rinses most of that debris away during each wash, but the filter still needs a hand clean from time to time.

The drain hose carries dirty water from the dishwasher to your sink drain or another household drain. A kink, a sharp bend or a blockage in it can leave water in the tub, so check it once the filters are clean.

Controls water entering the appliance from your home’s plumbing.

A heating element turns electricity into heat. It warms the wash water in a dishwasher or washer and heats the cavity of an oven. A heating error tells you the heat isn’t right; it doesn’t prove the element itself has failed.

The door lock holds the door shut while a cycle runs. If it doesn’t click into place, the ASKO DBI786 dishwasher won’t start, and the WM86L washer shows E2, a door lock error.
How a visit works.
Thoughtful care, with you in the loop.

Choose your appliance and describe the issue. We’ll confirm the visit details.

The technician checks the appliance and agrees the price with you before work starts.

Once the repair is complete, the technician checks the work and explains what was done.
Write down whether it stopped while filling, washing or draining, and take a photo of any code on the display.
Have the model name, article number and serial number from the plate ready when you book. The same code can mean different things on different models, so we match it to yours.
Unload the racks if you can and leave room in front of the dishwasher. The technician handles anything behind the kickplate or under the counter.
Book a visit if water still stands in the tub, dishes come out dirty, or a code returns after you’ve cleaned the filters.
For F40 or F54, turn off the water supply valve before you unplug the dishwasher, then book.
Arrange a diagnosticYou agree the price with the technician before any work starts. Exact cost is confirmed after an on-site diagnostic.
Repairs covered by the manufacturer’s warranty go through ASKO itself. We give a warranty on our workmanship.
Clean the coarse and fine filters. On the DBI786 that is the first step for F11, F52 and F68, and clogged filters are the first cause the manual lists for water left in the tub.
Yes. Tell us what you see on the dishes and which program you use. A machine that finishes its cycle can still have a spray, heating or softening problem worth a look.
The technician agrees the price with you before any work starts. The exact cost is confirmed after the on-site diagnostic. Mention the code or symptom when you book, so the technician arrives prepared.
Repairs covered by the manufacturer's warranty go through ASKO itself. We give a warranty on our workmanship. If you’re not sure whether ASKO’s cover still applies, have your purchase date handy when you call.
Yes, OEM parts are available on order. We order once the diagnostic shows exactly what your model needs, so you never pay for a guess.
Code / symptom / part / service
F11 means your ASKO dishwasher couldn’t pump the water out. Clean the coarse and fine filters first, then clear the drain pump and check the drain hose. All three are owner jobs in the manual, done with the power off.
The DBI786 manual traces water left above the filters to four things you can check yourself: clogged or loose filters, debris in the drain pump, a missing drain pump stop, and a kinked or blocked drain hose. Unplug the dishwasher before you start.
Moves used water out of the dishwasher.
Arrange a model-specific diagnostic at the appliance.
Office details and the access information to include.