Inside the appliance

Water hardness / softener. In plain English.

Water hardness is the amount of dissolved minerals in your tap water. An ASKO dishwasher with a built-in softener treats it with dishwasher salt, so set the right hardness level and keep salt in to avoid a white film on dishes.

Last reviewed

Gray salt reservoir cap beside its open threaded port in a steel dishwasher tub
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Water hardness / softener in the appliance

On the DBI786, the softener is built in and topped up through the salt compartment, whose lid you turn counterclockwise to open. The DBI675 manual has no softener setting.

The picture illustrates the component type. It does not identify a compatible replacement for your model.

Owner care, within the model instructions.

Switch off and unplug before owner-accessible checks. Watch for standing water and sharp debris. Do not touch a wet plug or electrical area, remove service panels, or go beyond your model’s owner instructions.

  1. 1

    Find your water hardness

    Your local water utility can tell you how hard your supply is. The DBI786 table works in several units, including grains per gallon (gr/gal).

  2. 2

    Set the softener level

    Choose the setting from the manual’s table, from 0 to 9. With water under 6 gr/gal, choose 0; the softener switches off and you don’t need salt.

  3. 3

    Top up with dishwasher salt

    When the salt symbol lights up, open the lid, pour special dishwasher salt through the funnel, wipe off spills and close the lid clockwise. Start a program straight away to avoid rust stains.

Cleaning or replacement?

Leave internal testing to a technician.

Book a visit if white film or spots keep appearing with the right setting and a full salt compartment, or if salt keeps leaking with the lid screwed tight.

Arrange a diagnostic

Sources and model boundaries.

These references support the Water hardness / softener guidance. Read the manual that matches your model.

  • DBI786IXXLSSOF.U dishwasher user manual
  • DBI675 dishwasher operating instructions

Use the instructions for your exact model. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
What happens if I put detergent in the salt compartment?

Don’t. The DBI786 manual warns that dishwasher detergent in the salt compartment destroys the water softener. Only special dishwasher salt goes in there.

How much salt does the compartment hold?

On the DBI786, fill it until it is full, up to 750 g (26 oz). The very first time, pour in about 1 liter (0.3 gal) of water before the salt; after that, water isn’t needed.

My water is very hard. Is the built-in softener enough?

The DBI786 softener covers water up to about 52 gr/gal at setting 9. If your water is harder than that, ASKO recommends connecting an external water softener.

Does every ASKO dishwasher have a softener?

No. The DBI786 has one built in, with a hardness setting and a salt compartment. The DBI675 manual has none; it asks you to check your water hardness because hard water generally needs more detergent and rinse aid.

Let’s take care of it.

Your home has a rhythm.
Let’s bring it back.