Inside the appliance

Flow meter. In plain English.

A flow meter measures how much water passes through the dishwasher’s water inlet as it fills. It’s an internal part you can’t see or service. If your dishwasher fills slowly or not at all, start with the water supply.

Last reviewed

Clear plastic flow meter with a small impeller and electrical connector
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Flow meter in the appliance

It is part of the water-entry system inside the dishwasher, between the inlet hose and the tub. Its exact position depends on the model, and reaching it means removing panels.

The picture illustrates the component type. It does not identify a compatible replacement for your model.

Owner care, within the model instructions.

Switch off and unplug before owner-accessible checks. Watch for standing water and sharp debris. Do not touch a wet plug or electrical area, remove service panels, or go beyond your model’s owner instructions.

  1. 1

    Open the supply valve fully

    For F12, the DBI786 manual’s first question is whether the water supply valve is on. Turn it all the way open and run a program.

  2. 2

    Look along the inlet hose

    Follow the visible part of the inlet hose and look for kinks or a pinched section. Don’t take panels off to get at the meter.

Cleaning or replacement?

Leave internal testing to a technician.

Book a visit if water reaches the dishwasher but filling still stops, or if a water inlet code keeps coming back. Testing the flow meter and the inlet valve needs panel access and instruments.

Arrange a diagnostic

Sources and model boundaries.

These references support the Flow meter guidance. Read the manual that matches your model.

  • DBI786IXXLSSOF.U dishwasher user manual

Use the instructions for your exact model. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
How would I know the flow meter is the problem?

From the outside, you usually can’t. A fill problem looks much the same whether it starts at the supply, the hose, the inlet valve or the meter, so a technician tests them in turn.

What water pressure does an ASKO dishwasher need?

The DBI786 manual gives 4.2 to 140 psi (0.03 to 1.0 MPa), and repeats that range in its F12 and F67 entries.

Can I clean the flow meter?

No. It sits inside the water path, and the owner’s manuals give no procedure for it. Your cleaning stops at the filters, the spray arms and the other parts the manual shows you how to remove.

Can I reuse my old inlet hose?

No. The DBI786 says to use only the inlet hose supplied with the dishwasher, not old or spare hoses.

Let’s take care of it.

Your home has a rhythm.
Let’s bring it back.