ASKO dishwasher F56 / Wash motor and circulation

ASKO dishwasher
error F56

Dishwasher / display reference

F56 points to the circulation pump, which pushes wash water through the spray arms. On the DBI786 and DBI776, run one more program first. On the DBI675, the manual says to call for service straight away.

Also shown as Fault F56

Last reviewed

Dishwasher / display reference
Meaning
F56 points to the circulation pump, which pushes wash water through the spray arms. On the DBI786 and DBI776, run one more program first. On the DBI675, the manual says to call for service straight away.
Who handles it
Model-dependent / read first
Related codes
Source
Asko DBI786IXXLSSOF.U User Manual, Troubleshooting

What ASKO dishwasher F56 means.

What it means

F56 points to the circulation pump, which pushes wash water through the spray arms. On the DBI786 and DBI776, run one more program first. On the DBI675, the manual says to call for service straight away.

What you can safely check

On a DBI786 or DBI776, you can run any dishwashing program once more.

When to call a technician

F56 returns after one more program on a DBI786 or DBI776, or appears at all on a DBI675.

Your check-list / saved on this device

Safe checks, in order.

0 of 2 checks done
  1. ASKO dishwasher F56: Brushed steel dishwasher control strip with a lit display and small buttons
    Illustration. Follow your model’s instructions.
    Before you begin

    Check your model first

    On a DBI786 or DBI776, you can run any dishwashing program once more. On a DBI675, skip the retry and go straight to booking.

  2. Black-gloved hands lifting a mesh filter out of a stainless dishwasher tub
    Illustration. Follow your model’s instructions.
    Check 2

    Book service

    Book a diagnostic if F56 comes back after the retry, or right away on a DBI675.

Still showing F56?

Share the model and the checks you tried. Start your request here.

Book a visit

How wash water circulates.

Conceptual dishwasher sectionFiltersSumpWash pump / motorLower spray armUpper spray arm12345
  1. 2Sump

Schematic. Layouts vary by model. Select an outlined part to see its photo and the matching check.

Parts behind the message.

Empty stainless dishwasher tub seen from above with the lower spray arm and round filter at the center of the floor, open door rack in front

Component reference

Dishwasher circulation pump

F56 is the code an ASKO dishwasher gives for its circulation pump, which moves wash water around the tub.

Read the definition

The manual behind the message.

Manufacturer document

Asko DBI786IXXLSSOF.U User Manual, Troubleshooting

ASKO / Gorenje Group

Document 879712en / p. 39

F56 appears in the DBI675, DBI776 and DBI786 manuals, but the first step isn’t the same on all of them.

Here to help

Good questions.
Clear answers.

Talk to our team
Is F56 a drain pump problem?

No. F56 is the pump that circulates water through the spray arms during the wash. Drain pump problems show as F11 or F68.

Why can I retry on a DBI786 but not on a DBI675?

The two manuals give different instructions. The DBI786 allows one more program first; the DBI675 sends you straight to service. Follow the one for your model.

Can I fix the circulation pump myself?

No. It sits inside the machine, and the manual gives owners no repair steps for it. A technician needs to test it.

What should I note down before the visit?

Your model number, when F56 first appeared and whether it came back after a retry. Having that ready makes the visit quicker to plan.

Let’s take care of it.

Your home has a rhythm.
Let’s bring it back.