Inside the appliance
Heating element. In plain English.
A heating element turns electricity into heat. It warms the wash water in a dishwasher or washer and heats the cavity of an oven. A heating error tells you the heat isn’t right; it doesn’t prove the element itself has failed.

Where it fits.
Heating element in the appliance
Where it sits depends on the appliance. The OT8687S oven has upper, lower and grill elements; a dishwasher or washer heats its water out of reach inside the machine. ASKO’s T5HXL dryers heat their air with a heat pump instead.
The picture illustrates the component type. It does not identify a compatible replacement for your model.
What changes when this system needs attention.
Heating element concerns can appear alongside a change in performance or a recurring code. Testing is needed before deciding whether the component is responsible.
Owner care, within the model instructions.
Switch off and unplug before owner-accessible checks. Watch for standing water and sharp debris. Do not touch a wet plug or electrical area, remove service panels, or go beyond your model’s owner instructions.
- 1
Check the program or mode
Make sure you picked a program or cooking mode that heats the way you expect. On the OT8687S, Top Heat uses only the upper element and Bottom Heat only the lower one, so one-sided browning is normal there.
- 2
Run Self-cleaning for F41
On the DBI786, the first step for F41 is the Self-cleaning program with citric acid. If F41 returns, turn off the water supply valve, unplug the dishwasher and call for service.
- 3
Restart once for E6
On the WM86L washer, E6 is a water heating error. Restart the program; if E6 comes back, call a technician.
Cleaning or replacement?
Leave internal testing to a technician.
Book a visit if the appliance still won’t heat after these steps, or if a fuse or breaker keeps tripping. Element tests involve live wiring and belong with a technician.
Arrange a diagnosticSources and model boundaries.
These references support the Heating element guidance. Read the manual that matches your model.
- Asko DBI786IXXLSSOF.U User Manual, Troubleshooting (PDF on the Gorenje Group document server, linked from us.asko.com)
- WM86L washing machine instructions for use
- OT8687S / OT8687A oven instructions for use
- ASKO T5HXLW.U / T5HXLT.U / T5HXLG.U (TD86) heat-pump tumble dryer instructions for use
Use the instructions for your exact model. See how we research these pages.
How can I tell which oven element isn’t working?
You can narrow it down. On the OT8687S, different modes use different elements, so try Top Heat and then Bottom Heat and note which one stays cold. Pass that on to the technician instead of guessing at the part.
Does an ASKO dryer have a heating element?
ASKO’s T5HXL dryers don’t heat with a classic element; their US manual says they use a heat pump to heat the air. For slow drying, start with the lint filters: when they clog, the compressor can switch off to prevent overheating.
Can I replace a heating element myself?
We advise against it. It means opening panels and handling live connections, and the OT8687S manual says repairs should only be done by a qualified service technician.
Why does my oven keep tripping the breaker?
The OT8687S manual lists a fuse that switches off regularly as a reason to call a service technician. Stop using the oven until it has been checked.
Code / symptom / part / service
Connect the message to the next step.
F41
F41 is a heater error on the DBI786 and DBI776. ASKO’s first step is the Self-cleaning program with citric acid. If F41 comes back, turn off the water, unplug the dishwasher and book a technician.
Dishwasher not draining
The DBI786 manual traces water left above the filters to four things you can check yourself: clogged or loose filters, debris in the drain pump, a missing drain pump stop, and a kinked or blocked drain hose. Unplug the dishwasher before you start.
Dishwasher repair
Arrange a model-specific diagnostic at the appliance.
Find your metro
Office details and the access information to include.


