ASKO dishwasher F41 / Heating

ASKO dishwasher
error F41

Dishwasher / display reference

F41 is a heater error on the DBI786 and DBI776. ASKO’s first step is the Self-cleaning program with citric acid. If F41 comes back, turn off the water, unplug the dishwasher and book a technician.

Also shown as Fault F41

Last reviewed

Dishwasher / display reference
Meaning
F41 is a heater error on the DBI786 and DBI776. ASKO’s first step is the Self-cleaning program with citric acid. If F41 comes back, turn off the water, unplug the dishwasher and book a technician.
Who handles it
Owner checks first, then a technician
Source
Asko DBI786IXXLSSOF.U User Manual, Troubleshooting

What ASKO dishwasher F41 means.

What it means

F41 is a heater error on the DBI786 and DBI776. ASKO’s first step is the Self-cleaning program with citric acid. If F41 comes back, turn off the water, unplug the dishwasher and book a technician.

What you can safely check

Empty the dishwasher and put two tablespoons of citric acid in the detergent compartment.

When to call a technician

F41 shows again after a Self-cleaning run with citric acid.

Your check-list / saved on this device

Safe checks, in order.

0 of 3 checks done
  1. ASKO dishwasher F41: Brushed steel dishwasher control strip with a lit display and small buttons
    Illustration. Follow your model’s instructions.
    Before you begin

    Run Self-cleaning with citric acid

    Empty the dishwasher and put two tablespoons of citric acid in the detergent compartment. Run the Self-cleaning program with no dishes inside.

  2. Black-gloved hands lifting a mesh filter out of a stainless dishwasher tub
    Illustration. Follow your model’s instructions.
    Check 2

    Shut it down if F41 returns

    Turn off the water supply valve, then pull the plug. Leave the dishwasher like that.

  3. Technician in a navy jacket showing a checklist on a tablet to a customer
    Illustration. Follow your model’s instructions.
    Check 3

    Book a diagnostic

    A technician tests the heater and its connections. Don’t use the dishwasher until then.

Still showing F41?

Share the model and the checks you tried. Start your request here.

Book a visit

The heating system.

Conceptual dishwasher sectionWaterHeating elementWash water123
  1. 1Water
  2. 3Wash water

Schematic. Layouts vary by model. Select an outlined part to see its photo and the matching check.

Parts behind the message.

Looped stainless heating element with two terminals on dark slate

Component reference

Heating element

A heating element turns electricity into heat.

Read the definition

The manual behind the message.

Manufacturer document

Asko DBI786IXXLSSOF.U User Manual, Troubleshooting

ASKO / Gorenje Group

Document 879712en / pp. 38–39

F41 is listed for the DBI776 and DBI786. The DBI675 code table doesn’t include it, so on that model go by your own manual.

Here to help

Good questions.
Clear answers.

Talk to our team
How much citric acid do I use for F41?

Two tablespoons, in the manual detergent compartment, with the racks empty. That’s the amount the DBI786 manual gives for the Self-cleaning program.

Does F41 apply to the DBI675?

The DBI675 manual has no F41. If your DBI675 shows it, look at the code table in that manual and call if the code isn’t there.

Can I keep washing dishes with F41?

Run Self-cleaning once, as the manual says. If F41 comes back, stop using the dishwasher: close the water, unplug it and book a visit.

Can I test the heater myself?

No. The heater sits inside the machine, behind panels you shouldn’t open. Leave the testing to a technician.

Let’s take care of it.

Your home has a rhythm.
Let’s bring it back.