Diagnostics and repair
Experienced technicians assess the appliance before recommending work. OEM parts are available on order, with the correct part identified for the model.
The care journal
Something stopped working? Start with the checks the manual allows, and know when to hand over to a technician.

Most ASKO dishwashers that won't start were not closed within four seconds of pressing Start/Stop, have a child lock or Delayed start set, or have no power. Here is how to check each one and when to call.

When an ASKO heat-pump dryer stops heating or drying, the usual causes are clogged filters, a room that is too warm, cold or cramped, the wrong program, or laundry that wasn't spun enough. Here's how to check each one.

An ASKO washer that won't spin may have an unbalanced load, a spin setting turned off, or water that can't drain past a clogged pump filter. Here's how to check each one and when to call a technician.

If your ASKO dishwasher is leaking, turn off the water supply valve first, then read the display. Here is what F54, F40 and F10 mean, the checks you can do safely, and when to call a technician.

When an ASKO dishwasher leaves food or film on dishes, the usual causes are blocked spray arms, dirty or loose filters, loading that blocks the water, or the wrong detergent, program or salt setting. Here's how to fix each one.

Photograph any message before you press a button. For F54, close the water supply valve before you unplug; for F40, close the valve and call.
Read the full sequence
The DBI786 manual traces water left above the filters to four things you can check yourself: clogged or loose filters, debris in the drain pump, a missing drain pump stop, and a kinked or blocked drain hose. Unplug the dishwasher before you start.

Close the water supply valve before anything else, then look at the display. F54 tells you the overflow guard has tripped; F40 tells you the inlet valve is letting water through when it should be shut. Either way, keep the water off and book service.

On ASKO dishwashers like the DBI786 and DBI675, you press Start and then close the door within four seconds. If the door isn’t shut in time, nothing happens. Check that first, then look for Delayed start, the child lock and power at the outlet or breaker.

Moves used water out of the dishwasher.

Catches larger pieces of food before they reach the drain system.

The fine filter sits under the coarse filter and catches the smaller particles. Your ASKO rinses most of that debris away during each wash, but the filter still needs a hand clean from time to time.

A brushless drain pump is a drain pump driven by a brushless (BLDC) motor. On the ASKO DBI786 it has its own code, F68, and the manual treats it like F11: filters, pump wheel and drain hose come first.

The drain hose carries dirty water from the dishwasher to your sink drain or another household drain. A kink, a sharp bend or a blockage in it can leave water in the tub, so check it once the filters are clean.
F11 means your ASKO dishwasher couldn’t pump the water out. Clean the coarse and fine filters first, then clear the drain pump and check the drain hose. All three are owner jobs in the manual, done with the power off.
F68 points to the brushless drain pump that empties your dishwasher. Start with the same checks as F11: clean the filters, clear the pump and look at the drain hose. Call if the code comes back.
Experienced technicians assess the appliance before recommending work. OEM parts are available on order, with the correct part identified for the model.
Repairs covered by the manufacturer’s warranty go through ASKO itself. We give a warranty on our workmanship.
Six common ones: a dishwasher that won’t start, won’t drain, leaks or doesn’t clean well, a washer that won’t spin and a dryer that won’t heat. Each guide starts with the safe checks and ends with a clear point to call.
Yes. Each guide starts from what you can see, such as water left in the tub or a drum that won’t turn. If a code does appear, its page sits alongside the guide.
Once or twice is fine, if the manual allows it. If water is leaking, the same code returns or the next check means taking off a panel, stop and book a visit.
Say which checks you did and what changed afterward, if anything. Have the model number and a photo of any code ready. That saves time at the start of the visit.
Code / symptom / part / service
The DBI786 manual traces water left above the filters to four things you can check yourself: clogged or loose filters, debris in the drain pump, a missing drain pump stop, and a kinked or blocked drain hose. Unplug the dishwasher before you start.
Arrange a model-specific diagnostic at the appliance.
Office details and the access information to include.