Diagnostics and repair
Experienced technicians assess the appliance before recommending work. OEM parts are available on order, with the correct part identified for the model.
The care journal
Small routines that keep an ASKO appliance working well: filters, salt, descaling and the parts you can safely reach.

Clean an ASKO dishwasher by wiping the door, seal and panel, clearing the spray arms and running the empty Self-cleaning program with two tablespoons of citric acid when limescale builds up.

Find your water hardness, choose the matching 0–9 setting from ASKO's table, and keep the salt compartment filled with special dishwasher salt whenever the setting is 1 or higher.

Run the Drain program, unplug the washer, open the pump filter cover, empty the water through the small drain hose, then unscrew the filter counterclockwise, rinse it and screw it back in clockwise.

Clean the door lint filter after every load, and clean the lower lint filter, its foam filter and the housing at least every 10 cycles, brushing the heat exchanger fins gently if dust has built up.

Clean an ASKO OT8687S by wiping it with warm soapy water and running Aqua clean on a cold oven with 0.15 liters of water. Take out the guide rails, door and door glass when they need a deeper clean.

Switch the dishwasher off and unplug it first. Then feel carefully for broken glass in the bottom of the tub.
Read the full sequence
The DBI786 manual traces water left above the filters to four things you can check yourself: clogged or loose filters, debris in the drain pump, a missing drain pump stop, and a kinked or blocked drain hose. Unplug the dishwasher before you start.

Close the water supply valve before anything else, then look at the display. F54 tells you the overflow guard has tripped; F40 tells you the inlet valve is letting water through when it should be shut. Either way, keep the water off and book service.

On ASKO dishwashers like the DBI786 and DBI675, you press Start and then close the door within four seconds. If the door isn’t shut in time, nothing happens. Check that first, then look for Delayed start, the child lock and power at the outlet or breaker.

Moves used water out of the dishwasher.

Catches larger pieces of food before they reach the drain system.

The fine filter sits under the coarse filter and catches the smaller particles. Your ASKO rinses most of that debris away during each wash, but the filter still needs a hand clean from time to time.

A brushless drain pump is a drain pump driven by a brushless (BLDC) motor. On the ASKO DBI786 it has its own code, F68, and the manual treats it like F11: filters, pump wheel and drain hose come first.

The drain hose carries dirty water from the dishwasher to your sink drain or another household drain. A kink, a sharp bend or a blockage in it can leave water in the tub, so check it once the filters are clean.
F52 asks you to clean the coarse and fine filters. Newer ASKO manuals call it a water level error, but the fix starts in the same place: clean filters, then a test program.
F11 means your ASKO dishwasher couldn’t pump the water out. Clean the coarse and fine filters first, then clear the drain pump and check the drain hose. All three are owner jobs in the manual, done with the power off.
F68 points to the brushless drain pump that empties your dishwasher. Start with the same checks as F11: clean the filters, clear the pump and look at the drain hose. Call if the code comes back.
Experienced technicians assess the appliance before recommending work. OEM parts are available on order, with the correct part identified for the model.
Repairs covered by the manufacturer’s warranty go through ASKO itself. We give a warranty on our workmanship.
Six care routines: dishwasher filters, cleaning and descaling, and the water softener; the washer pump filter; dryer filter care; and oven cleaning. They’re the jobs ASKO expects you to do yourself between repairs.
It depends on the appliance. ASKO suggests cleaning the WM86L washer pump filter once a month, and more often after very dirty loads. The dishwasher manuals give no fixed schedule, so check the filters whenever you see scraps after a cycle.
Partly. Cleaning the filters is the first step, so the filter guide helps. If water still won’t drain after that, or a code like F11 shows up, move on to the troubleshooting guide for a dishwasher that isn’t draining.
Then the problem is probably past what routine care can reach. Write down what you cleaned and what’s still happening, and book a visit. Repeating the same cleaning won’t tell you more.
Code / symptom / part / service
The DBI786 manual traces water left above the filters to four things you can check yourself: clogged or loose filters, debris in the drain pump, a missing drain pump stop, and a kinked or blocked drain hose. Unplug the dishwasher before you start.
Arrange a model-specific diagnostic at the appliance.
Office details and the access information to include.