Before work starts
You agree the price with the technician before any work starts. Exact cost is confirmed after an on-site diagnostic.
Independent appliance repair
We repair ASKO ovens that won’t heat or that bake unevenly. Tell us which cooking mode and temperature you used, and whether every mode has the problem or just one.


Check the simple things first. On the ASKO OT8687, an oven that leaves food raw may be waiting for you to confirm the settings, may have a door that isn’t fully closed, or may have lost power at a fuse or breaker.

Start with the setup. On the ASKO OT8687, Hot Air is the function meant for even baking, with the tray on level 2 and the oven preheated. If results are still patchy that way, note what you baked and where it browned, then book a visit.

First check the child lock: on the ASKO OT8687, press and hold the lock key to turn it off. If the touch controls still ignore you, switch the oven off at the breaker for a few minutes, then turn it back on.

That’s normal. The ASKO OT8687 has a cooling fan that keeps the casing and control panel cool, and it carries on for a while after you switch the oven off. It stops on its own.
This appliance’s code meanings are not researched here. Use its model manual and send a photo of the display with your request.
See the research statusThese pictures use dishwasher parts to show each component type. They don’t tell you what fits your oven; the technician matches any replacement to its exact model.

A heating element turns electricity into heat. It warms the wash water in a dishwasher or washer and heats the cavity of an oven. A heating error tells you the heat isn’t right; it doesn’t prove the element itself has failed.

An NTC temperature sensor is a small probe whose electrical resistance drops as it warms up. The appliance’s electronics read that resistance to know how hot the water or air is, and use it to control heating.

The door lock holds the door shut while a cycle runs. If it doesn’t click into place, the ASKO DBI786 dishwasher won’t start, and the WM86L washer shows E2, a door lock error.
How a visit works.
Thoughtful care, with you in the loop.

Choose your appliance and describe the issue. We’ll confirm the visit details.

The technician checks the appliance and agrees the price with you before work starts.

Once the repair is complete, the technician checks the work and explains what was done.
Note the mode and temperature where the problem shows. If you can, try another mode; on the OT8687S, Top Heat and Bottom Heat each use a different element.
If the display shows ERROR followed by a number, take a photo before you reset anything.
Let the oven cool fully before the visit, and clear the counter and floor in front of it.
Book a visit if the oven still won’t heat or bake evenly after you’ve checked the settings, or if an ERROR number comes back.
Leave electrical tests and anything behind the panels to the technician.
Arrange a diagnosticYou agree the price with the technician before any work starts. Exact cost is confirmed after an on-site diagnostic.
Repairs covered by the manufacturer’s warranty go through ASKO itself. We give a warranty on our workmanship.
On the OT8687S, ERROR with a number points to the electronic module. Disconnect the oven for a few minutes, reconnect it and set the clock. If the error comes back, it’s time for a technician.
Yes. Cold spots, slow heating and uneven browning are all worth a visit, even with a clear display. Tell us what you cooked and how it turned out.
The technician agrees the price with you before any work starts. The exact cost is confirmed after the on-site diagnostic. A note of which modes fail helps the technician plan the diagnostic.
Repairs covered by the manufacturer's warranty go through ASKO itself. We give a warranty on our workmanship. Your purchase date usually tells you which applies.
Yes, OEM parts are available on order. An oven has several elements and sensors, so the diagnostic shows which one your model needs before anything is ordered.
Code / symptom / part / service
Check the simple things first. On the ASKO OT8687, an oven that leaves food raw may be waiting for you to confirm the settings, may have a door that isn’t fully closed, or may have lost power at a fuse or breaker.
A heating element turns electricity into heat. It warms the wash water in a dishwasher or washer and heats the cavity of an oven. A heating error tells you the heat isn’t right; it doesn’t prove the element itself has failed.
Arrange a model-specific diagnostic at the appliance.
Office details and the access information to include.