Start from the symptom
ASKO oven baking unevenly.
Start with the setup. On the ASKO OT8687, Hot Air is the function meant for even baking, with the tray on level 2 and the oven preheated. If results are still patchy that way, note what you baked and where it browned, then book a visit.

Start with safe observations.
Switch off and unplug before owner-accessible checks. Watch for standing water and sharp debris. Do not touch a wet plug or electrical area, remove service panels, or go beyond your model’s owner instructions.
- 1
Bake with Hot Air
Hot Air blows heated air from the back of the oven and is the function ASKO describes as giving uniform heat. Use it when evenness matters most.
- 2
Use level 2 and preheat
Slide the tray into the gap between the guide rail sliders on level 2, not on top of them. Wait until preheating has finished before the food goes in.
- 3
Track the pattern
Note which side or corner over- or under-browns, the function, the temperature and whether it happens every time.
Systems a technician may investigate.
These pictures use dishwasher parts to show each component type. They don’t tell you what fits your oven; the technician matches any replacement to its exact model.

Heating element
A heating element turns electricity into heat. It warms the wash water in a dishwasher or washer and heats the cavity of an oven. A heating error tells you the heat isn’t right; it doesn’t prove the element itself has failed.

NTC sensor
An NTC temperature sensor is a small probe whose electrical resistance drops as it warms up. The appliance’s electronics read that resistance to know how hot the water or air is, and use it to control heating.

Door lock
The door lock holds the door shut while a cycle runs. If it doesn’t click into place, the ASKO DBI786 dishwasher won’t start, and the WM86L washer shows E2, a door lock error.
If the display adds a code.
Keep the exact message.
This appliance’s code meanings are not researched here. Use its model manual and send a photo of the display with your request.
See the research statusRead the related care guide.

Greasy oven walls? Let Aqua clean soften them first.
Clean an ASKO OT8687S by wiping it with warm soapy water and running Aqua clean on a cold oven with 0.15 liters of water. Take out the guide rails, door and door glass when they need a deeper clean.

ERROR on your ASKO oven? Here is what the manual says.
On the ASKO OT8687S, ERROR followed by a number points to a problem in the oven's electronic module. Disconnect the power for a few minutes, reconnect, set the time, and call a technician if it returns. The manual doesn't decode individual numbers.
When observation becomes a service request.
Leave internal testing to a technician.
Book a visit if baking stays uneven with the right function, level and preheating. Let the oven cool fully before the technician arrives.
Arrange a diagnosticSources and model boundaries.
These references support the Oven baking unevenly guidance. Read the manual that matches your model.
- OT8687S / OT8687A oven instructions for use
Use the instructions for your exact model. See how we research these pages.
Which rack level should I bake on?
For the main baking functions, ASKO suggests level 2 on the OT8687. The upper two levels are mainly for grilling, and level 1 is mainly used with bottom heat.
Do I need to preheat for baking?
ASKO recommends preheating for each of the main baking functions on the OT8687. Put the food in once the oven has reached temperature.
Is uneven baking a sign the fan has failed?
Not on its own. Check the function, level and preheating first. If Hot Air baking stays uneven, a technician can test the fan and the heating elements.
What should I tell the technician?
The function and temperature, the rack level, what you baked and which part came out wrong. A photo of the result helps.
Code / symptom / part / service
Connect the message to the next step.
Oven not heating
Check the simple things first. On the ASKO OT8687, an oven that leaves food raw may be waiting for you to confirm the settings, may have a door that isn’t fully closed, or may have lost power at a fuse or breaker.
Oven repair
Arrange a model-specific diagnostic at the appliance.
Find your metro
Office details and the access information to include.