Start from the symptom
ASKO oven fan runs after cooking.
That’s normal. The ASKO OT8687 has a cooling fan that keeps the casing and control panel cool, and it carries on for a while after you switch the oven off. It stops on its own.

Start with safe observations.
Switch off and unplug before owner-accessible checks. Watch for standing water and sharp debris. Do not touch a wet plug or electrical area, remove service panels, or go beyond your model’s owner instructions.
- 1
Check that cooking has stopped
Make sure the oven function is off and only the fan is running. Air you can feel at the door or around the outside is normal too.
- 2
Keep the vents clear
Don’t block the vents or cover the front of the oven while it cools down.
- 3
Notice what’s changed
If the fan now runs far longer than it used to, sounds different, or the oven won’t switch off, write down what you see and hear.
Systems a technician may investigate.
These pictures use dishwasher parts to show each component type. They don’t tell you what fits your oven; the technician matches any replacement to its exact model.

Heating element
A heating element turns electricity into heat. It warms the wash water in a dishwasher or washer and heats the cavity of an oven. A heating error tells you the heat isn’t right; it doesn’t prove the element itself has failed.

NTC sensor
An NTC temperature sensor is a small probe whose electrical resistance drops as it warms up. The appliance’s electronics read that resistance to know how hot the water or air is, and use it to control heating.

Door lock
The door lock holds the door shut while a cycle runs. If it doesn’t click into place, the ASKO DBI786 dishwasher won’t start, and the WM86L washer shows E2, a door lock error.
If the display adds a code.
Keep the exact message.
This appliance’s code meanings are not researched here. Use its model manual and send a photo of the display with your request.
See the research statusRead the related care guide.

Greasy oven walls? Let Aqua clean soften them first.
Clean an ASKO OT8687S by wiping it with warm soapy water and running Aqua clean on a cold oven with 0.15 liters of water. Take out the guide rails, door and door glass when they need a deeper clean.

ERROR on your ASKO oven? Here is what the manual says.
On the ASKO OT8687S, ERROR followed by a number points to a problem in the oven's electronic module. Disconnect the power for a few minutes, reconnect, set the time, and call a technician if it returns. The manual doesn't decode individual numbers.
When observation becomes a service request.
Leave internal testing to a technician.
Book a visit if the fan sounds different from usual, never seems to stop, or another problem shows up with it, like an ERROR message or an oven that keeps heating.
Arrange a diagnosticSources and model boundaries.
These references support the Oven fan runs after cooking guidance. Read the manual that matches your model.
- OT8687S / OT8687A oven instructions
Use the instructions for your exact model. See how we research these pages.
How long should the cooling fan run?
ASKO doesn’t give a set time; the manual only says the fan keeps working for a while. A sudden change from what your oven normally does matters more than the exact minutes.
Is steam from the oven vents normal?
Yes. Steam from the door or the vents is listed as normal, and so is condensation inside the oven. Wipe the cavity once it has cooled.
Can I cut the power to stop the fan?
Better not. The fan protects the casing and controls while they’re still hot, so let it finish.
Why do I hear clicking while the oven is on?
Clicking during cooking is normal on the OT8687, especially on the defrost setting.
Code / symptom / part / service
Connect the message to the next step.
Oven not heating
Check the simple things first. On the ASKO OT8687, an oven that leaves food raw may be waiting for you to confirm the settings, may have a door that isn’t fully closed, or may have lost power at a fuse or breaker.
Oven repair
Arrange a model-specific diagnostic at the appliance.
Find your metro
Office details and the access information to include.