Start from the symptom
ASKO oven not heating.
Check the simple things first. On the ASKO OT8687, an oven that leaves food raw may be waiting for you to confirm the settings, may have a door that isn’t fully closed, or may have lost power at a fuse or breaker.

Start with safe observations.
Switch off and unplug before owner-accessible checks. Watch for standing water and sharp debris. Do not touch a wet plug or electrical area, remove service panels, or go beyond your model’s owner instructions.
- 1
Confirm the settings
Check the function, temperature and timer you set, and that you pressed the confirm key to start the program.
- 2
Close the door properly
Make sure nothing is caught in the door and that it shuts fully. Door switches stop the oven while the door is open.
- 3
Check the breaker
Look for a tripped breaker or blown fuse on the oven’s circuit. If the breaker keeps tripping, stop and book a visit.
Systems a technician may investigate.
These pictures use dishwasher parts to show each component type. They don’t tell you what fits your oven; the technician matches any replacement to its exact model.

Heating element
A heating element turns electricity into heat. It warms the wash water in a dishwasher or washer and heats the cavity of an oven. A heating error tells you the heat isn’t right; it doesn’t prove the element itself has failed.

NTC sensor
An NTC temperature sensor is a small probe whose electrical resistance drops as it warms up. The appliance’s electronics read that resistance to know how hot the water or air is, and use it to control heating.

Door lock
The door lock holds the door shut while a cycle runs. If it doesn’t click into place, the ASKO DBI786 dishwasher won’t start, and the WM86L washer shows E2, a door lock error.
If the display adds a code.
Keep the exact message.
This appliance’s code meanings are not researched here. Use its model manual and send a photo of the display with your request.
See the research statusRead the related care guide.

Greasy oven walls? Let Aqua clean soften them first.
Clean an ASKO OT8687S by wiping it with warm soapy water and running Aqua clean on a cold oven with 0.15 liters of water. Take out the guide rails, door and door glass when they need a deeper clean.

ERROR on your ASKO oven? Here is what the manual says.
On the ASKO OT8687S, ERROR followed by a number points to a problem in the oven's electronic module. Disconnect the power for a few minutes, reconnect, set the time, and call a technician if it returns. The manual doesn't decode individual numbers.
When observation becomes a service request.
Leave internal testing to a technician.
If the oven stays cold with the right settings and power, or heats on some functions but not others, book a visit. Don’t open panels or touch the wiring or heating elements.
Arrange a diagnosticSources and model boundaries.
These references support the Oven not heating guidance. Read the manual that matches your model.
- OT8687S / OT8687A oven instructions for use
Use the instructions for your exact model. See how we research these pages.
Why does my oven heat on one function but not another?
Different functions use different heating elements, so one can work while another doesn’t. Write down which ones fail; it helps the technician narrow things down.
Why is my food undercooked when the oven seems hot?
Check the cooking time and the power setting first. ASKO lists both before anything else when food comes out overcooked or undercooked.
Could a power cut have upset my oven?
Yes. The manual says a power failure can reset the display. Unplug the oven, plug it back in and set the time again before you choose a function.
What should I tell the technician?
Which functions you tried, the temperature you set, how long you waited and any message on the display. Read the model and serial numbers off the inside of the oven door.
Code / symptom / part / service
Connect the message to the next step.
Oven not heating
Check the simple things first. On the ASKO OT8687, an oven that leaves food raw may be waiting for you to confirm the settings, may have a door that isn’t fully closed, or may have lost power at a fuse or breaker.
Oven repair
Arrange a model-specific diagnostic at the appliance.
Find your metro
Office details and the access information to include.