Before work starts
You agree the price with the technician before any work starts. Exact cost is confirmed after an on-site diagnostic.
Independent appliance repair
We repair ASKO dryers that don’t heat or take too long to dry. Tell us whether the drum turns, whether the laundry feels warm at the end and when you noticed the change.


On an ASKO heat-pump dryer, check the lint filters first. When they clog, the dryer can switch its compressor off to avoid overheating, and drying slows right down. Clean both filters, let the dryer cool, then restart it.

Before you book, check three things: that the washer spun the clothes well, that the load suits the program you picked, and that both lint filters are clean. Each one can stretch a drying cycle on an ASKO dryer.

Check the lock first. On ASKO T5HXL dryers, a locked display or locked buttons can make the dryer look dead. Then check for a delayed start, confirm the dryer is switched on, and if needed switch it off for a minute and back on.

A still drum doesn’t mean a broken belt. On ASKO T5HXL dryers, the drum stops when the door isn’t fully shut, the condensate tank is full, the program wasn’t started correctly, or a delayed start is set. Check those four first.

Some sounds are normal on a heat-pump dryer like the ASKO T5HXL: compressor hum, pumping as water moves to the tank, and buttons or zippers rattling. Loud rattling or shaking is different. Check that the dryer stands level, touches nothing nearby and has its load spread out.
This appliance’s code meanings are not researched here. Use its model manual and send a photo of the display with your request.
See the research statusThe glossary pictures show each part type with dishwasher examples. ASKO’s T5HXL dryers heat the air with a heat pump rather than an element, so the technician works out any replacement part from your exact model.
How a visit works.
Thoughtful care, with you in the loop.

Choose your appliance and describe the issue. We’ll confirm the visit details.

The technician checks the appliance and agrees the price with you before work starts.

Once the repair is complete, the technician checks the work and explains what was done.
Note whether the laundry comes out cold and damp or just takes longer than it used to, and which program you chose.
Clean the lint filter in the door, then the lower lint filter and its foam filter. On ASKO T5HXL heat-pump dryers, a clogged filter can make the compressor switch off to prevent overheating, which stretches drying time.
Let us know if the dryer sits on a washer, on a pedestal or in a closet, so we can plan access.
Book a visit if drying stays slow or cold with clean filters and an empty condensate tank.
Stop using the dryer if you notice a burning smell or anything else that worries you.
Arrange a diagnosticYou agree the price with the technician before any work starts. Exact cost is confirmed after an on-site diagnostic.
Repairs covered by the manufacturer’s warranty go through ASKO itself. We give a warranty on our workmanship.
For the T5HXL, the manual’s list starts with dirty filters, then a room that is too small, too cold or poorly ventilated, laundry that wasn’t spun enough, and a program that doesn’t suit the load. Work through those first.
ASKO’s T5HXL manual says to clean the lower lint filter, foam filter and mesh housing at least every 10 cycles. Dryers with a self-cleaning system stretch that to 30. The door filter needs cleaning after every cycle.
The technician agrees the price with you before any work starts. The exact cost is confirmed after the on-site diagnostic. Telling us whether the load is cold or only slow helps the technician plan the visit.
Repairs covered by the manufacturer's warranty go through ASKO itself. We give a warranty on our workmanship. Either way, the diagnostic tells you what’s wrong before you decide on the repair.
Yes, OEM parts are available on order. Your dryer’s model decides which part fits, so the technician confirms it during the diagnostic before ordering.
Code / symptom / part / service
On an ASKO heat-pump dryer, check the lint filters first. When they clog, the dryer can switch its compressor off to avoid overheating, and drying slows right down. Clean both filters, let the dryer cool, then restart it.
A heating element turns electricity into heat. It warms the wash water in a dishwasher or washer and heats the cavity of an oven. A heating error tells you the heat isn’t right; it doesn’t prove the element itself has failed.
Arrange a model-specific diagnostic at the appliance.
Office details and the access information to include.