What it means
F45 points to the diverter, the part that sends wash water to the different spray arms. Run any dishwashing program once more. If F45 comes back, book a technician.
ASKO dishwasher F45 / Wash motor and circulation
F45 points to the diverter, the part that sends wash water to the different spray arms. Run any dishwashing program once more. If F45 comes back, book a technician.
Also shown as Fault F45
F45 points to the diverter, the part that sends wash water to the different spray arms. Run any dishwashing program once more. If F45 comes back, book a technician.
Press any button to clear F45, then start any dishwashing program.
F45 appears again after one more program.
Your check-list / saved on this device

Press any button to clear F45, then start any dishwashing program. Watch whether the code comes back.

A second F45 means the diverter needs a technician. There’s nothing else on it for you to adjust.



Schematic. Layouts vary by model. Select an outlined part to see its photo and the matching check.
Manufacturer document
ASKO / Gorenje Group
Document 879712en / p. 39
F45 is listed for the DBI776 and DBI786. The DBI675 code table doesn’t include it.
It’s the part that switches the wash water between spray arms. F45 is the code for that part; it has nothing to do with the drain pump.
Run one more program, as the manual says. If the code comes back, stop and book a visit instead of running it again and again.
No. F56 is the circulation pump that pushes water through the spray arms. F45 is the diverter that chooses where that water goes.
Not in its manual. That model’s code table has no F45, so check your own manual if you see it.
Code / symptom / part / service
F56 points to the circulation pump, which pushes wash water through the spray arms. On the DBI786 and DBI776, run one more program first. On the DBI675, the manual says to call for service straight away.
The DBI786 manual traces water left above the filters to four things you can check yourself: clogged or loose filters, debris in the drain pump, a missing drain pump stop, and a kinked or blocked drain hose. Unplug the dishwasher before you start.
Arrange a model-specific diagnostic at the appliance.
Office details and the access information to include.