Start from the symptom
ASKO washer Stains remain after washing.
If stains survive the wash, the WM86L manual points first to a program that wasn’t strong enough for the soil. Try a more suitable program or a stain remover. Bleach-free and color detergents won’t lift every stain.

Start with safe observations.
Switch off and unplug before owner-accessible checks. Watch for standing water and sharp debris. Do not touch a wet plug or electrical area, remove service panels, or go beyond your model’s owner instructions.
- 1
Treat stains before washing
Blot a fresh stain with a sponge or paper towel and rinse it with cold or lukewarm water, never hot. Then read the care label before choosing a program.
- 2
Use the Stains program
If your washer has it, the Stains program lets you pick the stain type, such as red wine, grass, grease or coffee. Check the care label first.
- 3
Look at the detergent
The manual names bleach-free liquid and color powder detergents as one reason stains stay. Don’t mix stain products in the drum.
Systems a technician may investigate.
These pictures show each part type, and some are dishwasher examples. They don’t tell you which part fits your washer; the technician matches any replacement to your exact model.

Door lock
The door lock holds the door shut while a cycle runs. If it doesn’t click into place, the ASKO DBI786 dishwasher won’t start, and the WM86L washer shows E2, a door lock error.

Drain hose
The drain hose carries dirty water from the dishwasher to your sink drain or another household drain. A kink, a sharp bend or a blockage in it can leave water in the tub, so check it once the filters are clean.
If the display adds a code.
No direct code link for this topic.
No other researched dishwasher code is linked to this topic. Read the exact message against your model manual instead of substituting another code from the library.
See the research statusRead the related care guide.

Washer won't spin? Check the load first.
An ASKO washer that won't spin may have an unbalanced load, a spin setting turned off, or water that can't drain past a clogged pump filter. Here's how to check each one and when to call a technician.

Full load, half load or quarter? Pick the right washer program.
On the ASKO WM86L, use Normal Cotton for everyday cotton loads up to a full drum. Most special programs take half a load, and Wool/Hand wash, Time, Steam Refresh and a few others take a quarter. The maximum weight is printed on the washer's rating plate.
When observation becomes a service request.
Leave internal testing to a technician.
Book a visit if every load comes out poorly cleaned whatever program and detergent you use, or if an error appears on the display.
Arrange a diagnosticSources and model boundaries.
These references support the Stains remain after washing guidance. Read the manual that matches your model.
- WM86L washing machine instructions
Use the instructions for your exact model. See how we research these pages.
What are the white marks on my clothes after washing?
Usually powder detergent, not poor rinsing. Phosphate-free powders contain water-softening ingredients (zeolites) that can settle on fabric. Use less detergent or switch to liquid, and rinse the load again.
Why are there greasy spots on my laundry?
Very greasy laundry can leave traces or small grease rolls behind. Wash it with more detergent or on a more intensive cycle.
Can bleach and stain removers harm my washer?
They can cause rust and discoloration, so follow the product’s directions. ASKO suggests trying gentler methods on lighter stains first.
Could my washer be causing the marks?
Stains that were on the clothes before the wash point to the program or detergent. Marks that show up on clean items load after load are different: note what they look like and book a visit.
Code / symptom / part / service
Connect the message to the next step.
Washer not spinning
Check the spin setting first: a program without spin, or Pump stop, ends the wash with wet laundry on purpose. If the setting is right, the load may be too lopsided to spin, or a blocked pump filter may be keeping water in the drum.
Washer repair
Arrange a model-specific diagnostic at the appliance.
Find your metro
Office details and the access information to include.