Start from the symptom
ASKO washer making loud noises.
The WM86L manual traces loud rattling and shaking to how the washer stands and how the load sits. Check that it’s level with its feet locked, the transit bolts are out and it touches nothing nearby, then spread the laundry evenly.

Start with safe observations.
Switch off and unplug before owner-accessible checks. Watch for standing water and sharp debris. Do not touch a wet plug or electrical area, remove service panels, or go beyond your model’s owner instructions.
- 1
Check the feet and floor
Press down on each corner. If the washer rocks, the feet need adjusting and their lock nuts tightening; the installation section shows how. The floor under it should be firm and level.
- 2
Confirm the transit bolts are out
If the noise started after delivery or a move, check that all three transport bolts were removed. They lock the drum for transport and must come out before the washer runs.
- 3
Even out the load
Once the drum stops and the door unlocks, look for laundry bunched on one side. Spread it out, then restart the spin.
Systems a technician may investigate.
These pictures show each part type, and some are dishwasher examples. They don’t tell you which part fits your washer; the technician matches any replacement to your exact model.

Door lock
The door lock holds the door shut while a cycle runs. If it doesn’t click into place, the ASKO DBI786 dishwasher won’t start, and the WM86L washer shows E2, a door lock error.

Drain hose
The drain hose carries dirty water from the dishwasher to your sink drain or another household drain. A kink, a sharp bend or a blockage in it can leave water in the tub, so check it once the filters are clean.
If the display adds a code.
No direct code link for this topic.
No other researched dishwasher code is linked to this topic. Read the exact message against your model manual instead of substituting another code from the library.
See the research statusRead the related care guide.

Washer won't spin? Check the load first.
An ASKO washer that won't spin may have an unbalanced load, a spin setting turned off, or water that can't drain past a clogged pump filter. Here's how to check each one and when to call a technician.

Full load, half load or quarter? Pick the right washer program.
On the ASKO WM86L, use Normal Cotton for everyday cotton loads up to a full drum. Most special programs take half a load, and Wool/Hand wash, Time, Steam Refresh and a few others take a quarter. The maximum weight is printed on the washer's rating plate.
When observation becomes a service request.
Leave internal testing to a technician.
Book a visit if the washer still knocks or walks across the floor after you’ve leveled it and spread the load, or if you can’t reach the feet without moving it.
Arrange a diagnosticSources and model boundaries.
These references support the Washer making loud noises guidance. Read the manual that matches your model.
- WM86L washing machine instructions
Use the instructions for your exact model. See how we research these pages.
Why does my washer shake so much with a small load?
A few items, especially a single heavy one, bunch on one side of the drum. ASKO names small loads as a cause of noise and vibration and recommends against washing very small amounts.
What does “unbalance” on the display mean?
The washer found the wet load bunched on one side. Spread it out by hand and restart the spin. If E13 keeps appearing, book a visit.
Can I hold the washer still while it spins?
No. Stop the program and let the drum come to rest before you touch the washer or the laundry.
I’m moving house. Do I need the transit bolts again?
Yes. ASKO says to refit the bolts and plastic caps before transporting the washer, so keep them somewhere safe.
Code / symptom / part / service
Connect the message to the next step.
Washer not spinning
Check the spin setting first: a program without spin, or Pump stop, ends the wash with wet laundry on purpose. If the setting is right, the load may be too lopsided to spin, or a blocked pump filter may be keeping water in the drum.
Washer repair
Arrange a model-specific diagnostic at the appliance.
Find your metro
Office details and the access information to include.