Start from the symptom
ASKO washer Unusual noise.
A new washer noise is easier to pin down once you know when it happens: filling, washing, draining or spinning. Some sounds are normal, like the motorized door lock clicking. A loud drain pump is something you can often check yourself.

Start with safe observations.
Switch off and unplug before owner-accessible checks. Watch for standing water and sharp debris. Do not touch a wet plug or electrical area, remove service panels, or go beyond your model’s owner instructions.
- 1
Listen for the stage
Stay near the washer for one cycle and note when the sound starts. A hum while draining and a thump during the spin have different causes.
- 2
Check the pump filter if draining is loud
On the WM86L, a loud drain pump is linked to a blocked pump filter or filter housing. With the washer drained and unplugged, clean the filter and pick out anything caught behind it.
- 3
Photograph any message
If a message appears with the noise, take a photo before you clear it. Don’t keep running cycles just to hear a loud bang again.
Systems a technician may investigate.
These pictures show each part type, and some are dishwasher examples. They don’t tell you which part fits your washer; the technician matches any replacement to your exact model.

Door lock
The door lock holds the door shut while a cycle runs. If it doesn’t click into place, the ASKO DBI786 dishwasher won’t start, and the WM86L washer shows E2, a door lock error.

Drain hose
The drain hose carries dirty water from the dishwasher to your sink drain or another household drain. A kink, a sharp bend or a blockage in it can leave water in the tub, so check it once the filters are clean.
If the display adds a code.
No direct code link for this topic.
No other researched dishwasher code is linked to this topic. Read the exact message against your model manual instead of substituting another code from the library.
See the research statusRead the related care guide.

Washer won't spin? Check the load first.
An ASKO washer that won't spin may have an unbalanced load, a spin setting turned off, or water that can't drain past a clogged pump filter. Here's how to check each one and when to call a technician.

Full load, half load or quarter? Pick the right washer program.
On the ASKO WM86L, use Normal Cotton for everyday cotton loads up to a full drum. Most special programs take half a load, and Wool/Hand wash, Time, Steam Refresh and a few others take a quarter. The maximum weight is printed on the washer's rating plate.
When observation becomes a service request.
Leave internal testing to a technician.
Stop using the washer and book a visit if the noise is severe, keeps coming back after these checks, or arrives with a message on the display.
Arrange a diagnosticSources and model boundaries.
These references support the Washer making unusual noise guidance. Read the manual that matches your model.
- WM86L washing machine instructions for use (W5XLW.U, W5XLT.U, W5XLG.U)
Use the instructions for your exact model. See how we research these pages.
Is it normal to hear a click when my washer door locks?
Yes. The WM86L has a motorized door lock, so a short sound as it locks or unlocks is expected. Sounds that are new, or getting louder, are the ones worth reporting.
Why is my washer so much louder during the spin?
Spin speed changes the sound. The faster the spin, the louder the washer runs and the drier the clothes come out. A spin that is much louder than it used to be at the same speed is worth a visit.
Can a coin or a sock make my washer noisy?
Yes, if it ends up in the pump area. ASKO tells you to remove foreign objects from the pump housing when the drain pump gets loud. Check there before you assume the pump itself has failed.
How do I describe the noise to a technician?
Say when in the cycle you hear it and what it sounds like: grinding, knocking, humming or rattling. Mention whether it started after a move or a heavy load. A short phone recording helps too.
Code / symptom / part / service
Connect the message to the next step.
Washer not spinning
Check the spin setting first: a program without spin, or Pump stop, ends the wash with wet laundry on purpose. If the setting is right, the load may be too lopsided to spin, or a blocked pump filter may be keeping water in the drum.
Washer repair
Arrange a model-specific diagnostic at the appliance.
Find your metro
Office details and the access information to include.