ASKO dishwasher L7 / Dishwasher

ASKO dishwasher
error L7

The ASKO dishwasher documents we hold do not print L7. The DBI786 table lists F10, F11, F12, F40, F41, F45, F52, F54, F56, F67 and F68, and the DBI675 uses status lights. We can't give L7 a meaning. A restart and a look at the filters are safe; if it keeps coming back, book a visit.

Not decoded in the manuals we hold

Last reviewed

L7
L7Dishwasher
Manual evidence

What the manual says about ASKO dishwasher L7.

Manual evidence

Not listed. The DBI786 troubleshooting table covers F10, F11, F12, F40, F41, F45, F52, F54, F56, F67 and F68, and says any button clears the message. The DBI675 reports trouble through status lights, not numbered codes.

Safe first steps.

  1. 1

    Switch off and restart

    Use the main switch to power the machine down, wait a minute, then run a short program and see whether L7 comes back.

  2. 2

    Look for standing water

    Open the door and check the tub. Water above the filters points to drainage, so clean the coarse and fine filters, the first step the DBI786 gives for outlet and level messages.

  3. 3

    Read the model label

    The label sits on the door edge. Note the model, the serial number and the display exactly as it reads before you book.

  4. 4

    Close the supply if water shows

    Should water spread across the floor, close the inlet valve first. Pull the plug only once the valve is closed and the floor around the plug is dry.

Write this down before you call.

Open dishwasher loaded with plates and glasses in a dark wood kitchen
  • Model and serial number
  • Full display text
  • When the message appears
  • Checks you have already tried

When to call.

L7 keeps showing after a restart, the tub holds water, or the program halts before washing.

Book a visit(844) 731-2978

The documents we checked.

Source 1

DBI786 operating instructions

ASKO / Gorenje Group / 879712en / Troubleshooting

Source 2

Asko DBI675IXXLS.U / DBI675THXXLS.U / DBI675PHXXLS.U Operating Instructions, Troubleshooting (PDF on the Gorenje Group document server, linked from us.asko.com)

ASKO / Gorenje Group / Document 843099en / pp. 28–29

Here to help

Good questions.
Clear answers.

Talk to our team
Is L7 in ASKO's DBI786 error table?

No. The table stops at F10, F11, F12, F40, F41, F45, F52, F54, F56, F67 and F68, so L7 has no printed meaning there.

Can I run the dishwasher while it shows L7?

Try one restart. If the program runs, drains and the code stays away, keep watching it. If the tub keeps holding water or L7 returns, leave it off and book a visit.

Does L7 mean a drain, inlet or heater problem?

We can't say. The documents we hold do not tie L7 to any of them, and a guess could send you after the wrong part.

What should I have ready when I book for L7?

The model and serial from the door-edge label, the display as shown, and the point in the program where L7 appeared.

Let’s take care of it.

Your home has a rhythm.
Let’s bring it back.