Manual evidence
ERROR XX on the display means an error in the electronic module. Disconnect the appliance from the power supply for a few minutes, reconnect, set the time, and consult a service technician if the error persists.
ASKO oven Err2 / Oven
Err2 has no individual entry in the ASKO oven instructions we hold. The manuals cover all ERROR numbers with one instruction: an error in the electronic module. A full power reset comes first; if Err2 shows again, the oven needs a technician.
Cut power to the oven at the breaker for several minutes; the controls' off button does not reset the module.
After power returns, set the clock as the manual instructs, then try a short bake program.
Find the model on the rating plate inside the door frame and note when Err2 appeared.

Err2 reappears after the reset, or appears together with heating or fan problems.
Source 1
ASKO / Gorenje Group / OT8687 / EN 33–34, Solving problems
Source 2
ASKO / Gorenje Group / 794094en / EN 43, Solving problems
The manuals do not separate them. Both fall under the general ERROR XX instruction, and only a diagnostic shows which error the module stored.
Cutting the power clears the time. The manual includes setting it as part of the reset.
The manual does not describe a hazard for any ERROR number. If you notice a burning smell, smoke or a tripped breaker, stop using the oven and keep it off until it is checked.
The manual says a few minutes. Switch it off at the breaker rather than with the controls, then set the clock when power is back.