Asko Washer Error Code E36

If your Asko washer displays Error Code E36, it typically points to a communication failure between the User Interface (UI) and the Program Memory Control Unit (PMCU). This issue can interrupt your washer’s operation, but with the right steps, it’s often fixable.

What Error Code E36 Means

Error E36 indicates a breakdown in the connection between the control panel (UI) and the internal memory unit (PMCU) that manages your washer’s functions. This could be due to wiring problems or hardware malfunction.

Common Causes of Asko Error Code E36

• Faulty Wiring: Loose, damaged, or disconnected wires between the UI and PMCU.

• Component Failure: A defective UI or PMCU module can lead to communication issues.

• Software Errors: Outdated firmware may also trigger error E36.

How to Fix Asko Washer Error Code E36

1. Inspect the Wiring:

• Unplug the washer from the power outlet.

• Open the control panel and examine the wiring harness between the UI and PMCU.

• If you find frayed wires or loose connections, reconnect or replace them.

2. Perform a System Reset:

• Turn off and unplug your washer.

• Wait 5–10 minutes to allow internal components to reset.

• Plug it back in and restart the machine to see if the error clears.

3. Check for Firmware Updates:

• Go to the official Asko website.

• Look for firmware updates available for your washer model.

• Follow the manufacturer’s steps to update safely.

4. Contact Support:
If none of the above resolves the issue, it may be time to contact Asko customer support or a certified repair technician. Mention error code E36 and describe the troubleshooting steps you’ve taken.