Asko Washer Error Code E6

If your Asko washer is displaying Error Code E6, it usually points to a heating error related to the water temperature. This fault occurs when the washing machine is unable to reach the required water temperature during a wash cycle. Understanding the E6 error code and how to respond to it can help you avoid more serious damage or costly repairs.

What Causes Asko Washer Error Code E6?

1. Faulty Heating Element
The heating element is responsible for warming the water during the wash cycle. If it’s damaged or burned out, your washer may fail to heat water properly, triggering the E6 error.

2. Malfunctioning Temperature Sensor
This sensor monitors water temperature. If it sends incorrect readings or fails entirely, the washer may not reach the correct temperature, resulting in an E6 error code.

3. Damaged or Loose Wiring
Loose, corroded, or broken wires between the heating element, sensor, and control board can interrupt the heating process and lead to Asko washer heating errors.

DIY Fixes for Asko Washer E6 Error

Inspect the Heating Element
Locate the element (usually at the back or bottom of the washer) and check for signs of visible damage like cracks or burn marks. If it’s faulty, replacing it may clear the E6 code.

Check the Temperature Sensor
Ensure the sensor is properly connected and clean. If the washer still fails to detect temperature changes accurately, the sensor may need replacement.

Examine Wiring Connections
Check all wiring between the heating element, temperature sensor, and control board. Repair or replace any damaged connectors or wires.

Reset the Washing Machine
Unplug the washer for a few minutes to reset the electronics. Plug it back in and run a test cycle to see if the E6 error code reappears.

Refer to the User Manual
Your Asko washer’s manual may offer model-specific guidance and additional tips for troubleshooting error code E6.

When to Call a Professional

If you’ve tried the above steps and the error persists—or if you’re unsure about handling internal components—it’s best to contact a qualified Asko appliance repair technician. Prompt professional repair ensures your washer remains safe and efficient.

Need help with Asko Washer Error Code E6? Don’t wait—address heating issues early to prevent bigger problems.